Binaries Location¶
Linux Binaries¶
Built image binaries will be located under
build/tmp/deploy/images/smarc-rzg3e/ in the project directory.
The table below breaks down the necessary binaries needed for specific boot methods.
| File | Description | eSD Boot | Network Boot |
|---|---|---|---|
bl2_bp_spi-smarc-rzg3e.srec |
Bootloader for SPI memory that initializes the hardware components needed to run U-Boot. |  |
|
fip-smarc-rzg3e.srec |
Firmware package that bundles U-Boot and other secure components into one boot image. | |
|
Flash_Writer_SCIF_RZG3E_EVK_LPDDR4X.mot |
Software that is loaded into the RZ/G3Es RAM to write bootloader files into flash memory. | |
|
core-image-minimal-smarc-rzg3e.rootfs.tar.gz |
Compressed Linux filesystem containing the Linux kernel, drivers, applications and system configurations. This contains the kernel image and DTB under boot/. |
|
|
core-image-minimal-smarc-rzg3e.rootfs.wic.bmap |
A map for the WIC image that speeds up flashing by detailing which SD Card blocks need data and which are empty. | |
|
core-image-minimal-smarc-rzg3e.rootfs.wic.gz |
Compressed Linux disk image containing the partition table, bootloaders and rootfs (Linux kernel, drivers, applications and system configurations). | |
| File | Description | eSD Boot | Network Boot |
|---|---|---|---|
bl2_bp_spi-smarc-rzg3e.srec |
Bootloader for SPI memory that initializes the hardware components needed to run U-Boot. | |
|
fip-smarc-rzg3e.srec |
Firmware package that bundles U-Boot and other secure components into one boot image. | |
|
Flash_Writer_SCIF_RZG3E_EVK_LPDDR4X.mot |
Software that is loaded into the RZ/G3Es RAM to write bootloader files into flash memory. | |
|
core-image-weston-smarc-rzg3e.rootfs.tar.gz |
Compressed Linux filesystem containing the Linux kernel, drivers, applications and system configurations. This contains the kernel image and DTB under boot/. |
|
|
core-image-weston-smarc-rzg3e.rootfs.wic.bmap |
A map for the WIC image that speeds up flashing by detailing which SD Card blocks need data and which are empty. | |
|
core-image-weston-smarc-rzg3e.rootfs.wic.gz |
Compressed Linux disk image containing the partition table, bootloaders and rootfs (Linux kernel, drivers, applications and system configurations). | |
Note
The kernel image Image-smarc-rzg3e.bin and DTB
r9a09g047e57-smarc.dtb files are pre-installed into the
compressed rootfs, so they do not need to be used separately.
SDK Binary¶
The SDK installer
rz-vlp-glibc-x86_64-core-image-weston-cortexa55-smarc-rzg3e-toolchain-5.0.8.sh
will be located under build/tmp/deploy/sdk/ in the project directory.
This binary installs the toolchain environment containing all the tools needed to write and compile software for the RZ/G3E on the Host PC.