RZ/V2H AI SDK Configuration

This page explains the details of RZ/V2H AI SDK configurations.
To see the overview of RZ/V2H AI SDK, see RZ/V AI SDK Overview page.

Target Version: 6.00

Index

• Linux Components
• Drivers

Linux Components

The Linux components which are commonly used in RZ/V2H AI SDK is shown below.

Component	Version	Explanation
Yocto Linux	Yocto version: 5.0.11 (Scarthgap) *1 Kernel version: 6.1.141-cip43
OpenCV	4.9.0
OpenCL	2.0 Full Profile.
OpenGLES	1.1, 2.0, 3.0, 3.1 and 3.2
OpenMAX IL	1.1.2	This is used for H.264 encoding/decoding and H.265 encoding/decoding.

Other linux components installed to the root filesystem are listed in the below manifest file.

• "references/core-image-weston-rzv2h-evk.rootfs.manifest" in RZ/V2H AI SDK.

Note1 GStreamer libav plugin is no longer installed from Yocto version 5.0 (Scarthgap).
This means that codecs such as MPEG-1, MPEG-2, and MPEG-4 are no longer available in AI ​​SDK.
You are recommended to use H.264 or H.265.

Drivers

Following table shows the list of drivers.
For more details, see RZ/V2H BSP Manual Set and RZ/V2H Evaluation Board Kit Hardware Manual.

Items	IP	Support	Remarks
CPU	CPU/CA55	✔	Supports 1.1GHz, 1.5GHz, 1.6GHz and 1.7GHz. If you use CA55 at 1.8GHz, you will need configuration at system startup. For configuration instructions, see RZ/V Multi-OS Package.
External memory	LPDDR4	✔
Graphics	3D GPU	✔
	LCD Controller	✔
	Image Scaling Unit	✔
Camera Input	MIPI-CSI	✔
Display Out	MIPI-DSI	✔
Video Codec	H.264	✔
	H.265	✔
Audio	SSIF-2 TDM	✔
	SPDIF	✔
	ASRC(Asynchronous sample rate conversion)	✔
Timers	SYC (SystemCounter)	✔
	GPT	✔
	RTC	✔
	GTM	✔
	CMTW	✔
	WDT	✔
Analog	ADC	✔
	TSU	✔
Connectivity	xSPI	✔
	SDIO	✔
	eMMC	N/A	The board does not support eMMC.
	USB3(Gen2x1)	✔
	USB2.0	✔
	Gb Ether	✔
	PCIe Gen.3 RC	✔
	PCIe Gen.3 EP	N/A	The board does not support PCIe EP.
	IRQ	✔
	NMI	✔
	I3C	✔
	I2C	✔
	SCIF	✔
	RSCI-2	✔
	RSPI	✔
	CAN-FD	✔
	GPIO	✔
System	CPG	✔
	DMAC	✔

Back to Home >